Item No. 5032

Discounted Price

Futaba FX32 18 Channel Tray Radio
FX-32 Transmitter + R7008 Receiver

Synchronised bi-directional communication between transmitter and receiver, with high telemetry data rate (max. 9 times per second)
32 telemetry channels
Max. 1000 m telemetry range
Real-time display of telemetry data on integral screen
Speech output via user-selectable switch
Melody and sound output (for differentiated vario information)
Vibration alarm
Data recording of control signals (stick movements) and telemetry data on SD card
PC analysis software for recorded telemetry / GPS data and control signals
Receiver signal strength display for monitoring effective range
Range warning system (with optional GPS sensor) for safe flying close to the limits of vision
Receiver low-voltage warning system for monitoring the receiver battery
Freely configurable telemetry data output using screen, sound, speech and vibration
Precision stick units with 12-bit (4096-step) resolution for ultra-precise, super-fine control
The "Open-Stick" mechanisms of the stick units feature quadruple ballraces, and are virtually devoid of backlash
Large, 94 x 35 mm, high-contrast backlit screen (255 x 96 dot) for superb legibility even in strong sunlight
Graphic user interface and intuitive Cap-Touch control wheel (with button lock) for simple operation of all functions
Seven languages available: German, English, French, Italian, Spanish, Czech or Dutch.
Standardised, intuitive Futaba method of operation for a simple change-over
Freely assignable transmitter controls
Freely selectable channel sequence
Expanded as standard with 20 transmitter controls: 6 switches, 2 rotary knobs, 2 digital rotary controls
The two digital rotary controls provide a practical method of controlling auxiliary functions without releasing the primary sticks
Freely selectable trim assignment for all transmitter controls (including switches etc.)
The FX-32 transmitter features the proven Rotary Trim method. This technology combines the advantages of traditional analogue trims with those of digital trims. Just one movement sets and automatically stores the direction and magnitude of the trim value.
Hardware reverse for all controls and switches with free selection of switching direction
Direct selection of model memory in Start display for fast model selection
The primary stick mechanisms are set to universal mode by default, and can be set to "throttle right" or "throttle left" by the user.
Switchable stick mode: modes 1 - 4 available

Trainer function
option of cable or radio trainer module
with individual function transfer (teacher can transfer individual functions to the pupil) and mix-mode operation (teacher can override all functions)
Freely configurable Trainer channel assignment
S.BUS technology
Digital BUS technology for modelling
Ground-breaking serial control bus.
Fully digital inclusion of S-BUS components, including S.BUS servos, S.BUS speed controllers and S.BUS sensors, compatible with S.BUS1 and S.BUS2 (bi-directional)
Allows optimum component positioning combined with efficient wiring layout
Future-proof digital technology for all future Futaba components. S.BUS components can be programmed and registered directly via the transmitter
Serial digital signal, ideal for flybarless systems, gyros and battery backers
General functions
30 integral model memories, with infinite expansion by means of SD card (max. 2 GB, SD and SD-HC), 3916 models per optional 2GB SD card.
Model memory data from T12FG and FX-30 transmitters can be read directly from the SD card.
Graphic servo monitor provides a clear display of all servo travels, with servo test function
Wide receiver voltage range of 3.6 V to 8.4 V allows broad choice of receiver battery types
Future-proof: software update facility using SD card.
Proven, practical mixer menus for programming all servos and mixer functions to suit model type
Special model type specific mixer programs for:
power models (2 - 6 wing flaps),
model gliders (2 - 8 wing flaps),
model helicopters (6 swashplate types)
8 freely programmable flight modes for each model memory, for optimum set-up of each flight mode - flight mode switching with priority and switching delay for smooth transitions. Unrestricted name selection.
Program for all tail types: Normal, V-Tail, Delta, Flying wing, separate elevators (Ailvator)
Servo throw adjustment with Limit-Function for all proportional channels
Servo reverse and mid-point adjustment for all proportional channels
Flight phase dependent trim control selection
Trim value display in steps or %
Failsafe and Battery-Failsafe settings
2 operation timer, of which one model memory related
2 free stop watches, with memory function
Switchable large display of stop watches
Function key lock prevents accidental data entry
With logical switch function for switches and primary sticks.
Digital stick trims, optionally with normal, centre or ATL (asymmetrical) trim function. Optional global mode (effective in all flight modes) or single mode, (effective in specific flight mode only).
Unrestricted selection of trim control for each transmitter control (including switches and sliders), including digital buttons, analogue rotary knobs and rotary sliders.
Alternatively, pre-programmed transmitter control settings from linear, via exponential, up to 9-point (or 17-point) curve. With separately variable speed setting and delay for forward and back movement. Optional "global" mode (effective in all flight modes) or "single" mode (effective only in the relevant flight mode).
10 free programmable mixers per model memory.. Pre-programmed transmitter control settings available, from linear to 9-point curve (can be expanded to 17 points).
Optionally with or without trim, "Stick-to-stick" or "Stick-to-servo" mixer mode.
Separate delay and speed settings for switching mixers on and off.
Mixers can be connected in series (cascaded). All switches, stick functions and virtual functions can be assigned as transmitter controls.
Offset function and fine adjustment using external mixer input trimmer; can be rotary knob, switch or stick.
Optional global mode (effective in all flight modes) or single mode, (effective only in specific flight mode).
Alternatively, each programmable mixer can be switched from a curve mixer to Offset mode. This Offset mixer makes it possible to mix a maximum of four offset values per programmable mixer, with separate delay and speed settings for switching mixer on and off, to affect freely selectable functions.
Choice of time-controlled offset functions for up to four functions; can be used as a landing gear door sequencer. Naturally, this mixer function can also be activated in "global" mode (settings applicable to all flight modes) or "separate" mode (effective only in specific flight mode). Door Sequencer

1 FX-32 2.4 GHz FASSTest® transmitter with aluminium transport case
1 LiPo transmitter battery, 7.4 V / 3400 mAh
1 FASSTest®-R7008SB 2.4 GHz receiver
1 Switch harness with charge socket
Suppliers Comments
The Top One, and Futaba Quality. The FX-32 is a fully expanded High-End 18-channel console transmitter with integrated telemetry functions, exploiting 2.4 GHz FASSTest® Technology.
The FX-32 exploits Futaba‘s FASSTest® technology to provide optimum transmission security and a direct, ultra-precise sensation of control. Combine all this with a comprehensive array of functions and the usual high Futaba quality, and the F-32 is the perfect transmitter for all demanding pilots.
FASSTest® 2.4 GHz technology
Superior interference rejection through a combination of the advantages of DSSS and FHSS modulation
Future-proof (already fulfils the new EU norm)
32-channel telemetry system
Up to 1000 m telemetry range
Real-time display on large screen
Speech output, melody and tone output, vibration alarm
Data recording of control signals and telemetry data
94 x 35 mm backlit screen (255 x 96 dots)
S.BUS technology for fully digital inclusion of S.BUS servos, S.BUS speed controllers and S.BUS sensors
Fully expanded 18-channel transmitter with twenty freely programmable physical controls
Accurate stick units with Open-Stick mechanisms and 12-bit resolution
Zero backlash
quadruple ballraces
18 channels
FASSTest® technology (Futaba Advanced Spread Spectrum technology)
FASSTest® hybrid technology combines the advantages of DSSS and FHSS modulation, with extreme channel spread (spread factor 11)
DSSS spreading combined with optimised FHSS frequency hopping produces superior interference rejection and ultra-fast response for an accurate, direct sensation of control.
100 mW transmitter power
Real-Time Response
The latency (interval between moving the stick and the servo's response) of the FASST / FASSTest® system is much faster than other 2.4 GHz systems.
Extreme range >3000m
Ultra-fast, direct, completely digital modulation for super-fast response
Switchable FASSTest® High-Speed mode: ultra-fast frame rate of 6.3 ms for digital servos (12-channel, reduced telemetry functions)
Easy Link - extremely simple, fast binding process between transmitter and receiver
Ultra-fast, reliable, automatic re-binding even under difficult conditions
Intelligent servo timing ensures simultaneous servo movement, preventing differential servo response
Dual Aerial Diversity – lightning-fast switching between two receiver aerials for optimum reception signal quality (depending on receiver type)
Pre-Vision – FASST / FASSTest® receivers constantly scan the input signal and apply intelligent Futaba error correction.
No loss of response speed even when the frequency band is densely occupied
Integral range test function for checking effective range before launching the model
Modulation can be switched to FASST or FHSS for backward compatibility with existing Futaba components


Related Items
Item Number
Discounted Price
3092....Radio Bits...Futaba Double Transmitter carry case ( for aircraft radios)...$171.00